Hướng dẫn triển khai FHIR cốt lõi Việt Nam — VN Core FHIR Implementation Guide
0.10.0 - Draft for Community Review
Hướng dẫn triển khai FHIR cốt lõi Việt Nam — VN Core FHIR Implementation Guide - Draft for Community Review (v0.10.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions
| Draft tại thời điểm 2026-08-06 |
Các định nghĩa cho vn-ext-cost-calculation-context phần mở rộng
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | Năm trục ĐỘC LẬP mô tả cách một dòng chi phí trên bảng kê được hình thành: vai trò dòng, cơ sở tính, quy tắc trần, miễn trần (lặp được) và phiên bản bộ công thức. Vì sao không mã hoá bằng một enum tổ hợp. Các trục thực sự độc lập với nhau. Một dòng thiết bị thành phần trong gói có thể vừa lấy giá trị báo cáo làm căn cứ, vừa thuộc diện miễn trần theo NĐ 188/2025/NĐ-CP Điều 16 — ba sự thật không suy ra được từ nhau. Liệt kê tổ hợp sẽ nổ số lượng mã và vẫn bỏ sót khi văn bản mới thêm một nhánh. Vì sao cần Ranh giới. Extension mô tả dòng được tính THEO CÁCH NÀO; nó không tự tính và không thay giá trị tiền. Số tiền vẫn nằm ở carrier chi phí, và cột 9 luôn là giá trị authoritative. Optional Extension Element - found in all resources. |
| Short | Ngữ cảnh tính chi phí dòng bảng kê — Cost Calculation ContextOptional Extensions Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())vn-cost-calculation-stent-ordinal: Dòng stent bổ sung phải khai thứ tự trong khoảng 2-4. An additional-stent line SHALL declare an ordinal between 2 and 4. ( extension.where(url = 'lineRole').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and code = 'additional-stent').empty() or extension.where(url = 'ordinal').value.ofType(positiveInt).where($this >= 2 and $this <= 4).exists())vn-cost-calculation-exemption-needs-cap: Chỉ khai miễn trần khi dòng đang áp một quy tắc trần. A cap exemption SHALL NOT be declared on a line with no cap rule. ( extension.where(url = 'exemption').empty() or extension.where(url = 'capRule').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and code = 'no-cap').empty())vn-cost-calculation-transport-basis-coherent: Cơ sở tính vận chuyển và vai trò dòng vận chuyển phải đi cùng nhau. A transport calculation basis and the patient-transport line role SHALL be used together. ( extension.where(url = 'calculationBasis').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and (code = 'transport-kilometre' or code = 'transport-fuel' or code = 'transport-actual-one-way')).exists() = extension.where(url = 'lineRole').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and code = 'patient-transport').exists())ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 40..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:lineRole | |
| Slice Name | lineRole |
| Definition | An Extension |
| Short | Vai trò dòng: thông thường, tổng gói, thành phần gói, stent bổ sung, vận chuyểnAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:lineRole.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 8. Extension.extension:lineRole.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | lineRole |
| 10. Extension.extension:lineRole.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see Vai trò dòng chi phí — Cost Line Role (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-line-role-vs) |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 12. Extension.extension:calculationBasis | |
| Slice Name | calculationBasis |
| Definition | An Extension |
| Short | Cách dòng được tính — quyết định công thức nào áp đượcAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 14. Extension.extension:calculationBasis.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 16. Extension.extension:calculationBasis.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | calculationBasis |
| 18. Extension.extension:calculationBasis.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see Cơ sở tính chi phí — Cost Calculation Basis (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-calculation-basis-vs) |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Extension.extension:capRule | |
| Slice Name | capRule |
| Definition | An Extension |
| Short | Quy tắc trần đang áp cho dòngAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 22. Extension.extension:capRule.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 24. Extension.extension:capRule.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | capRule |
| 26. Extension.extension:capRule.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see Quy tắc trần thanh toán — Cost Cap Rule (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-cap-rule-vs) |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Extension.extension:exemption | |
| Slice Name | exemption |
| Definition | An Extension |
| Short | Căn cứ miễn trần — lặp được vì một dòng có thể thuộc nhiều diệnAdditional content defined by implementations |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 30. Extension.extension:exemption.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:exemption.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | exemption |
| 34. Extension.extension:exemption.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see Miễn trần thanh toán — Cost Cap Exemption (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-cap-exemption-vs) |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:ordinal | |
| Slice Name | ordinal |
| Definition | An Extension |
| Short | Thứ tự trong nhóm — bắt buộc với stent bổ sung (2-4)Additional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 38. Extension.extension:ordinal.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 40. Extension.extension:ordinal.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | ordinal |
| 42. Extension.extension:ordinal.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | positiveInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 44. Extension.extension:formulaVersion | |
| Slice Name | formulaVersion |
| Definition | An Extension |
| Short | Bộ công thức đang áp: QĐ 697/QĐ-BYT hay chuỗi QĐ 3176/QĐ-BYTAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 46. Extension.extension:formulaVersion.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 48. Extension.extension:formulaVersion.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | formulaVersion |
| 50. Extension.extension:formulaVersion.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Binding | The codes SHALL be taken from For codes, see Phiên bản bộ công thức — Cost Formula Version (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-formula-version-vs) |
| Type | Coding, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 52. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://fhir.hl7.org.vn/core/StructureDefinition/vn-ext-cost-calculation-context |
| 54. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | Năm trục ĐỘC LẬP mô tả cách một dòng chi phí trên bảng kê được hình thành: vai trò dòng, cơ sở tính, quy tắc trần, miễn trần (lặp được) và phiên bản bộ công thức. Vì sao không mã hoá bằng một enum tổ hợp. Các trục thực sự độc lập với nhau. Một dòng thiết bị thành phần trong gói có thể vừa lấy giá trị báo cáo làm căn cứ, vừa thuộc diện miễn trần theo NĐ 188/2025/NĐ-CP Điều 16 — ba sự thật không suy ra được từ nhau. Liệt kê tổ hợp sẽ nổ số lượng mã và vẫn bỏ sót khi văn bản mới thêm một nhánh. Vì sao cần Ranh giới. Extension mô tả dòng được tính THEO CÁCH NÀO; nó không tự tính và không thay giá trị tiền. Số tiền vẫn nằm ở carrier chi phí, và cột 9 luôn là giá trị authoritative. |
| Short | Ngữ cảnh tính chi phí dòng bảng kê — Cost Calculation Context |
| Invariants | vn-cost-calculation-stent-ordinal: Dòng stent bổ sung phải khai thứ tự trong khoảng 2-4. An additional-stent line SHALL declare an ordinal between 2 and 4. (extension.where(url = 'lineRole').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and code = 'additional-stent').empty() or extension.where(url = 'ordinal').value.ofType(positiveInt).where($this >= 2 and $this <= 4).exists())vn-cost-calculation-exemption-needs-cap: Chỉ khai miễn trần khi dòng đang áp một quy tắc trần. A cap exemption SHALL NOT be declared on a line with no cap rule. ( extension.where(url = 'exemption').empty() or extension.where(url = 'capRule').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and code = 'no-cap').empty())vn-cost-calculation-transport-basis-coherent: Cơ sở tính vận chuyển và vai trò dòng vận chuyển phải đi cùng nhau. A transport calculation basis and the patient-transport line role SHALL be used together. ( extension.where(url = 'calculationBasis').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and (code = 'transport-kilometre' or code = 'transport-fuel' or code = 'transport-actual-one-way')).exists() = extension.where(url = 'lineRole').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and code = 'patient-transport').exists()) |
| 2. Extension.extension | |
| Control | 4..? |
| 4. Extension.extension:lineRole | |
| Slice Name | lineRole |
| Short | Vai trò dòng: thông thường, tổng gói, thành phần gói, stent bổ sung, vận chuyển |
| Control | 1..1 |
| Must Support | true |
| 6. Extension.extension:lineRole.extension | |
| Control | 0..0 |
| 8. Extension.extension:lineRole.url | |
| Fixed Value | lineRole |
| 10. Extension.extension:lineRole.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from Vai trò dòng chi phí — Cost Line Role (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-line-role-vs) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 12. Extension.extension:calculationBasis | |
| Slice Name | calculationBasis |
| Short | Cách dòng được tính — quyết định công thức nào áp được |
| Control | 1..1 |
| Must Support | true |
| 14. Extension.extension:calculationBasis.extension | |
| Control | 0..0 |
| 16. Extension.extension:calculationBasis.url | |
| Fixed Value | calculationBasis |
| 18. Extension.extension:calculationBasis.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from Cơ sở tính chi phí — Cost Calculation Basis (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-calculation-basis-vs) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 20. Extension.extension:capRule | |
| Slice Name | capRule |
| Short | Quy tắc trần đang áp cho dòng |
| Control | 1..1 |
| Must Support | true |
| 22. Extension.extension:capRule.extension | |
| Control | 0..0 |
| 24. Extension.extension:capRule.url | |
| Fixed Value | capRule |
| 26. Extension.extension:capRule.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from Quy tắc trần thanh toán — Cost Cap Rule (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-cap-rule-vs) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 28. Extension.extension:exemption | |
| Slice Name | exemption |
| Short | Căn cứ miễn trần — lặp được vì một dòng có thể thuộc nhiều diện |
| Control | 0..* |
| Must Support | true |
| 30. Extension.extension:exemption.extension | |
| Control | 0..0 |
| 32. Extension.extension:exemption.url | |
| Fixed Value | exemption |
| 34. Extension.extension:exemption.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from Miễn trần thanh toán — Cost Cap Exemption (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-cap-exemption-vs) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 36. Extension.extension:ordinal | |
| Slice Name | ordinal |
| Short | Thứ tự trong nhóm — bắt buộc với stent bổ sung (2-4) |
| Control | 0..1 |
| Must Support | true |
| 38. Extension.extension:ordinal.extension | |
| Control | 0..0 |
| 40. Extension.extension:ordinal.url | |
| Fixed Value | ordinal |
| 42. Extension.extension:ordinal.value[x] | |
| Control | 1..? |
| Type | positiveInt |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 44. Extension.extension:formulaVersion | |
| Slice Name | formulaVersion |
| Short | Bộ công thức đang áp: QĐ 697/QĐ-BYT hay chuỗi QĐ 3176/QĐ-BYT |
| Control | 1..1 |
| Must Support | true |
| 46. Extension.extension:formulaVersion.extension | |
| Control | 0..0 |
| 48. Extension.extension:formulaVersion.url | |
| Fixed Value | formulaVersion |
| 50. Extension.extension:formulaVersion.value[x] | |
| Control | 1..? |
| Binding | The codes SHALL be taken from Phiên bản bộ công thức — Cost Formula Version (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-formula-version-vs) |
| Type | Coding |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 52. Extension.url | |
| Fixed Value | http://fhir.hl7.org.vn/core/StructureDefinition/vn-ext-cost-calculation-context |
| 54. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | Năm trục ĐỘC LẬP mô tả cách một dòng chi phí trên bảng kê được hình thành: vai trò dòng, cơ sở tính, quy tắc trần, miễn trần (lặp được) và phiên bản bộ công thức. Vì sao không mã hoá bằng một enum tổ hợp. Các trục thực sự độc lập với nhau. Một dòng thiết bị thành phần trong gói có thể vừa lấy giá trị báo cáo làm căn cứ, vừa thuộc diện miễn trần theo NĐ 188/2025/NĐ-CP Điều 16 — ba sự thật không suy ra được từ nhau. Liệt kê tổ hợp sẽ nổ số lượng mã và vẫn bỏ sót khi văn bản mới thêm một nhánh. Vì sao cần Ranh giới. Extension mô tả dòng được tính THEO CÁCH NÀO; nó không tự tính và không thay giá trị tiền. Số tiền vẫn nằm ở carrier chi phí, và cột 9 luôn là giá trị authoritative. |
| Short | Ngữ cảnh tính chi phí dòng bảng kê — Cost Calculation Context |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())vn-cost-calculation-stent-ordinal: Dòng stent bổ sung phải khai thứ tự trong khoảng 2-4. An additional-stent line SHALL declare an ordinal between 2 and 4. ( extension.where(url = 'lineRole').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and code = 'additional-stent').empty() or extension.where(url = 'ordinal').value.ofType(positiveInt).where($this >= 2 and $this <= 4).exists())vn-cost-calculation-exemption-needs-cap: Chỉ khai miễn trần khi dòng đang áp một quy tắc trần. A cap exemption SHALL NOT be declared on a line with no cap rule. ( extension.where(url = 'exemption').empty() or extension.where(url = 'capRule').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and code = 'no-cap').empty())vn-cost-calculation-transport-basis-coherent: Cơ sở tính vận chuyển và vai trò dòng vận chuyển phải đi cùng nhau. A transport calculation basis and the patient-transport line role SHALL be used together. ( extension.where(url = 'calculationBasis').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and (code = 'transport-kilometre' or code = 'transport-fuel' or code = 'transport-actual-one-way')).exists() = extension.where(url = 'lineRole').value.ofType(CodeableConcept).coding.where(system = 'http://fhir.hl7.org.vn/core/CodeSystem/vn-cost-calculation-axis-cs' and code = 'patient-transport').exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 4..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:lineRole | |
| Slice Name | lineRole |
| Definition | An Extension |
| Short | Vai trò dòng: thông thường, tổng gói, thành phần gói, stent bổ sung, vận chuyển |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:lineRole.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:lineRole.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:lineRole.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | lineRole |
| 14. Extension.extension:lineRole.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Vai trò dòng chi phí — Cost Line Role (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-line-role-vs) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:calculationBasis | |
| Slice Name | calculationBasis |
| Definition | An Extension |
| Short | Cách dòng được tính — quyết định công thức nào áp được |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:calculationBasis.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:calculationBasis.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:calculationBasis.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | calculationBasis |
| 24. Extension.extension:calculationBasis.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Cơ sở tính chi phí — Cost Calculation Basis (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-calculation-basis-vs) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:capRule | |
| Slice Name | capRule |
| Definition | An Extension |
| Short | Quy tắc trần đang áp cho dòng |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 28. Extension.extension:capRule.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 30. Extension.extension:capRule.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:capRule.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | capRule |
| 34. Extension.extension:capRule.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Quy tắc trần thanh toán — Cost Cap Rule (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-cap-rule-vs) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:exemption | |
| Slice Name | exemption |
| Definition | An Extension |
| Short | Căn cứ miễn trần — lặp được vì một dòng có thể thuộc nhiều diện |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 38. Extension.extension:exemption.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 40. Extension.extension:exemption.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:exemption.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | exemption |
| 44. Extension.extension:exemption.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Miễn trần thanh toán — Cost Cap Exemption (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-cap-exemption-vs) |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:ordinal | |
| Slice Name | ordinal |
| Definition | An Extension |
| Short | Thứ tự trong nhóm — bắt buộc với stent bổ sung (2-4) |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 48. Extension.extension:ordinal.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 50. Extension.extension:ordinal.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 52. Extension.extension:ordinal.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | ordinal |
| 54. Extension.extension:ordinal.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | positiveInt |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 56. Extension.extension:formulaVersion | |
| Slice Name | formulaVersion |
| Definition | An Extension |
| Short | Bộ công thức đang áp: QĐ 697/QĐ-BYT hay chuỗi QĐ 3176/QĐ-BYT |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 58. Extension.extension:formulaVersion.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 60. Extension.extension:formulaVersion.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 62. Extension.extension:formulaVersion.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | formulaVersion |
| 64. Extension.extension:formulaVersion.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Phiên bản bộ công thức — Cost Formula Version (required to http://fhir.hl7.org.vn/core/ValueSet/vn-cost-formula-version-vs) |
| Type | Coding |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://fhir.hl7.org.vn/core/StructureDefinition/vn-ext-cost-calculation-context |
| 68. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
