Hướng dẫn triển khai FHIR cốt lõi Việt Nam — VN Core FHIR Implementation Guide
0.10.0 - Draft for Community Review
Hướng dẫn triển khai FHIR cốt lõi Việt Nam — VN Core FHIR Implementation Guide - Draft for Community Review (v0.10.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions
| Retired tại thời điểm 2026-07-20 |
Các định nghĩa cho vn-ext-coverage-benefit-stage phần mở rộng
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | NGHỈ DÙNG từ 0.10.0 — không dùng cho dữ liệu mới. Extension từng mang khoá, khoảng thời gian và mức hưởng của một giai đoạn trên Claim hoặc ExplanationOfBenefit. Dữ liệu mới dùng một RETIRED since 0.10.0 — do not use for new data. This extension formerly carried a benefit stage on Claim or ExplanationOfBenefit. New data uses multiple ordered Optional Extension Element - found in all resources. |
| Short | Giai đoạn hưởng bảo hiểm — Coverage Benefit StageOptional Extensions Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())vn-coverage-benefit-stage-level-range: **NGHỈ DÙNG từ 0.10.0 — không dùng cho dữ liệu mới. Thay bằng `vn-ext-cost-statement-segment`.** Extension này sinh ra để gộp nhiều giai đoạn hưởng trên `Claim.insurance`. Từ 0.10.0, extension nghỉ dùng: một `Claim` có thể mang nhiều `insurance` khi đổi thẻ giữa đợt, còn giai đoạn thẻ/mức hưởng và các dòng chi phí chuyển sang bảng kê bằng `vn-ext-cost-statement-segment` trên Invoice. Không tạo Claim hoặc MA_LK mới chỉ vì đổi thẻ. `Claim.related` giữ cardinality tuỳ chọn và ngữ nghĩa FHIR, nhưng nằm ngoài cam kết hỗ trợ tối thiểu quốc gia. Extension thay thế có `coverage 0..1` để biểu diễn được người KHÔNG có thẻ BHYT (QĐ 697/QĐ-BYT Phần Hai). Chi tiết: ADR-0021. Mức hưởng của giai đoạn phải nằm trong khoảng từ 0 đến 100 phần trăm. The benefit level for a coverage stage SHALL be between 0 and 100 percent. ( extension('benefitLevel').value >= 0 and extension('benefitLevel').value <= 100)ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 30..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:sequence | |
| Slice Name | sequence |
| Definition | Số nguyên dương định danh duy nhất giai đoạn hưởng trong cùng Claim hoặc ExplanationOfBenefit. A positive integer that uniquely identifies the benefit stage within the containing Claim or ExplanationOfBenefit. |
| Short | Khoá thứ tự giai đoạn hưởng — Benefit-stage sequence keyAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:sequence.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 8. Extension.extension:sequence.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | sequence |
| 10. Extension.extension:sequence.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | positiveInt, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 12. Extension.extension:period | |
| Slice Name | period |
| Definition | Khoảng thời gian liên tục mà mức hưởng của giai đoạn có hiệu lực. The continuous period during which the stage benefit level applies. |
| Short | Khoảng thời gian áp dụng mức hưởng — Benefit-stage periodAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 14. Extension.extension:period.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 16. Extension.extension:period.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | period |
| 18. Extension.extension:period.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | Period, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 20. Extension.extension:period.value[x].start | |
| Definition | The start of the period. The boundary is inclusive. |
| Short | Starting time with inclusive boundary |
| Comments | If the low element is missing, the meaning is that the low boundary is not known. |
| Control | 10..1 This element is affected by the following invariants: per-1 |
| Type | dateTime |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 22. Extension.extension:period.value[x].end | |
| Definition | The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time. |
| Short | End time with inclusive boundary, if not ongoing |
| Comments | The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. |
| Control | 10..1 This element is affected by the following invariants: per-1 |
| Type | dateTime |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Meaning if Missing | If the end of the period is missing, it means that the period is ongoing |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 24. Extension.extension:benefitLevel | |
| Slice Name | benefitLevel |
| Definition | Tỷ lệ phần trăm mức hưởng BHYT áp dụng cho giai đoạn, trong khoảng 0..100. The BHYT benefit percentage applicable to the stage, constrained to 0..100. |
| Short | Mức hưởng BHYT từ 0 đến 100 — BHYT benefit level from 0 to 100Additional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 26. Extension.extension:benefitLevel.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..0* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 28. Extension.extension:benefitLevel.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | benefitLevel |
| 30. Extension.extension:benefitLevel.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 10..1 |
| Type | decimal, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 32. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://fhir.hl7.org.vn/core/StructureDefinition/vn-ext-coverage-benefit-stage |
| 34. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | NGHỈ DÙNG từ 0.10.0 — không dùng cho dữ liệu mới. Extension từng mang khoá, khoảng thời gian và mức hưởng của một giai đoạn trên Claim hoặc ExplanationOfBenefit. Dữ liệu mới dùng một RETIRED since 0.10.0 — do not use for new data. This extension formerly carried a benefit stage on Claim or ExplanationOfBenefit. New data uses multiple ordered |
| Short | Giai đoạn hưởng bảo hiểm — Coverage Benefit Stage |
| Invariants | vn-coverage-benefit-stage-level-range: **NGHỈ DÙNG từ 0.10.0 — không dùng cho dữ liệu mới. Thay bằng `vn-ext-cost-statement-segment`.**
Extension này sinh ra để gộp nhiều giai đoạn hưởng trên `Claim.insurance`. Từ 0.10.0, extension nghỉ dùng: một `Claim` có thể mang nhiều `insurance` khi đổi thẻ giữa đợt, còn giai đoạn thẻ/mức hưởng và các dòng chi phí chuyển sang bảng kê bằng `vn-ext-cost-statement-segment` trên Invoice. Không tạo Claim hoặc MA_LK mới chỉ vì đổi thẻ. `Claim.related` giữ cardinality tuỳ chọn và ngữ nghĩa FHIR, nhưng nằm ngoài cam kết hỗ trợ tối thiểu quốc gia. Extension thay thế có `coverage 0..1` để biểu diễn được người KHÔNG có thẻ BHYT (QĐ 697/QĐ-BYT Phần Hai).
Chi tiết: ADR-0021.
Mức hưởng của giai đoạn phải nằm trong khoảng từ 0 đến 100 phần trăm. The benefit level for a coverage stage SHALL be between 0 and 100 percent. (extension('benefitLevel').value >= 0 and extension('benefitLevel').value <= 100) |
| 2. Extension.extension | |
| Control | 3..? |
| 4. Extension.extension:sequence | |
| Slice Name | sequence |
| Definition | Số nguyên dương định danh duy nhất giai đoạn hưởng trong cùng Claim hoặc ExplanationOfBenefit. A positive integer that uniquely identifies the benefit stage within the containing Claim or ExplanationOfBenefit. |
| Short | Khoá thứ tự giai đoạn hưởng — Benefit-stage sequence key |
| Control | 1..1 |
| Must Support | true |
| 6. Extension.extension:sequence.extension | |
| Control | 0..0 |
| 8. Extension.extension:sequence.url | |
| Fixed Value | sequence |
| 10. Extension.extension:sequence.value[x] | |
| Control | 1..? |
| Type | positiveInt |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 12. Extension.extension:period | |
| Slice Name | period |
| Definition | Khoảng thời gian liên tục mà mức hưởng của giai đoạn có hiệu lực. The continuous period during which the stage benefit level applies. |
| Short | Khoảng thời gian áp dụng mức hưởng — Benefit-stage period |
| Control | 1..1 |
| Must Support | true |
| 14. Extension.extension:period.extension | |
| Control | 0..0 |
| 16. Extension.extension:period.url | |
| Fixed Value | period |
| 18. Extension.extension:period.value[x] | |
| Control | 1..? |
| Type | Period |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 20. Extension.extension:period.value[x].start | |
| Control | 1..? |
| Must Support | true |
| 22. Extension.extension:period.value[x].end | |
| Control | 1..? |
| Must Support | true |
| 24. Extension.extension:benefitLevel | |
| Slice Name | benefitLevel |
| Definition | Tỷ lệ phần trăm mức hưởng BHYT áp dụng cho giai đoạn, trong khoảng 0..100. The BHYT benefit percentage applicable to the stage, constrained to 0..100. |
| Short | Mức hưởng BHYT từ 0 đến 100 — BHYT benefit level from 0 to 100 |
| Control | 1..1 |
| Must Support | true |
| 26. Extension.extension:benefitLevel.extension | |
| Control | 0..0 |
| 28. Extension.extension:benefitLevel.url | |
| Fixed Value | benefitLevel |
| 30. Extension.extension:benefitLevel.value[x] | |
| Control | 1..? |
| Type | decimal |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 32. Extension.url | |
| Fixed Value | http://fhir.hl7.org.vn/core/StructureDefinition/vn-ext-coverage-benefit-stage |
| 34. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | NGHỈ DÙNG từ 0.10.0 — không dùng cho dữ liệu mới. Extension từng mang khoá, khoảng thời gian và mức hưởng của một giai đoạn trên Claim hoặc ExplanationOfBenefit. Dữ liệu mới dùng một RETIRED since 0.10.0 — do not use for new data. This extension formerly carried a benefit stage on Claim or ExplanationOfBenefit. New data uses multiple ordered |
| Short | Giai đoạn hưởng bảo hiểm — Coverage Benefit Stage |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())vn-coverage-benefit-stage-level-range: **NGHỈ DÙNG từ 0.10.0 — không dùng cho dữ liệu mới. Thay bằng `vn-ext-cost-statement-segment`.** Extension này sinh ra để gộp nhiều giai đoạn hưởng trên `Claim.insurance`. Từ 0.10.0, extension nghỉ dùng: một `Claim` có thể mang nhiều `insurance` khi đổi thẻ giữa đợt, còn giai đoạn thẻ/mức hưởng và các dòng chi phí chuyển sang bảng kê bằng `vn-ext-cost-statement-segment` trên Invoice. Không tạo Claim hoặc MA_LK mới chỉ vì đổi thẻ. `Claim.related` giữ cardinality tuỳ chọn và ngữ nghĩa FHIR, nhưng nằm ngoài cam kết hỗ trợ tối thiểu quốc gia. Extension thay thế có `coverage 0..1` để biểu diễn được người KHÔNG có thẻ BHYT (QĐ 697/QĐ-BYT Phần Hai). Chi tiết: ADR-0021. Mức hưởng của giai đoạn phải nằm trong khoảng từ 0 đến 100 phần trăm. The benefit level for a coverage stage SHALL be between 0 and 100 percent. ( extension('benefitLevel').value >= 0 and extension('benefitLevel').value <= 100) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 3..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:sequence | |
| Slice Name | sequence |
| Definition | Số nguyên dương định danh duy nhất giai đoạn hưởng trong cùng Claim hoặc ExplanationOfBenefit. A positive integer that uniquely identifies the benefit stage within the containing Claim or ExplanationOfBenefit. |
| Short | Khoá thứ tự giai đoạn hưởng — Benefit-stage sequence key |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:sequence.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:sequence.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:sequence.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | sequence |
| 14. Extension.extension:sequence.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | positiveInt |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:period | |
| Slice Name | period |
| Definition | Khoảng thời gian liên tục mà mức hưởng của giai đoạn có hiệu lực. The continuous period during which the stage benefit level applies. |
| Short | Khoảng thời gian áp dụng mức hưởng — Benefit-stage period |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:period.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:period.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:period.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | period |
| 24. Extension.extension:period.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | Period |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:period.value[x].id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 28. Extension.extension:period.value[x].extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.value[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 30. Extension.extension:period.value[x].start | |
| Definition | The start of the period. The boundary is inclusive. |
| Short | Starting time with inclusive boundary |
| Comments | If the low element is missing, the meaning is that the low boundary is not known. |
| Control | 1..1 This element is affected by the following invariants: per-1 |
| Type | dateTime |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 32. Extension.extension:period.value[x].end | |
| Definition | The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time. |
| Short | End time with inclusive boundary, if not ongoing |
| Comments | The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. |
| Control | 1..1 This element is affected by the following invariants: per-1 |
| Type | dateTime |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| Summary | true |
| Meaning if Missing | If the end of the period is missing, it means that the period is ongoing |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Extension.extension:benefitLevel | |
| Slice Name | benefitLevel |
| Definition | Tỷ lệ phần trăm mức hưởng BHYT áp dụng cho giai đoạn, trong khoảng 0..100. The BHYT benefit percentage applicable to the stage, constrained to 0..100. |
| Short | Mức hưởng BHYT từ 0 đến 100 — BHYT benefit level from 0 to 100 |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Must Support | true |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 36. Extension.extension:benefitLevel.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 38. Extension.extension:benefitLevel.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..0 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 40. Extension.extension:benefitLevel.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | benefitLevel |
| 42. Extension.extension:benefitLevel.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 1..1 |
| Type | decimal |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 44. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://fhir.hl7.org.vn/core/StructureDefinition/vn-ext-coverage-benefit-stage |
| 46. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
